HC685LG-020

Dimensions : Ø 27.5 X 46.5 mm
Shaft Diameter : Ø 2.305 mm
Input Voltage : 7.2 V DC
No Load Speed : 17230 rpm
No Load Current : 0.90 A
Stall Torque : 114.86 mNm
Stall Current : 32.37 A
Maximum Output Power : 51.24 W
Maximum Efficiency : 64 %
Speed at Maximum Efficiency : 14600 rpm
Weight : 100 g
Operation Temperature :-10 to 55°C
Storage Temperature :-20 to 80°C
Electrical Connection : Terminal

• Reference : UAG20N06RE
• Dimensions (mm) : Diam. 20 x 17.2
• Step angle : 18
• Holding torque (cNm) : 0.5
• Detent torque (cNm) : 0.14
• Winding : unipolar
• Rotor shaft mounting : Centring 8 mm / mouting plate with screw M2
• Voltage (V) : 24

• Reference : UGM50CNN
• Dimensions (mm) : 51 x 62.5
• Height (mm) : 15
• Max. Torque (cNm) : 100
• Weight (g) : 45
• Ratio : 500

• Reference : UGB60ENN
• Dimensions (mm) : 58 x 81
• Height (mm) : 17
• Max. Torque (cNm) : 250
• Weight (g) : 130
• Ratio : 6000

• Reference : UAT1ENB4RCZ4
• Dimensions (mm) : Diam. 20 x 17.2
• Rotor shaft mounting : Centring 6 mm / screw plate with slotted hole
• Voltage (V) : 24

• Reference : UFR40NB4RN
• Dimensions (mm) : Diam. 52 x 56
• Speed (rpm) @50Hz : 500
• Running torque (cNm) @50Hz : 5.3
• Voltage (VAC) : 24V / 50Hz
• Configuration : Four coils
• Shaft : 3mm
• with gearbox mounted : No
• gearbox reference :

• Reference : UGM15ENN
• Dimensions (mm) : 51 x 62.5
• Height (mm) : 15
• Max. Torque (cNm) : 100
• Weight (g) : 45
• Ratio : 1500

Dimensions : Ø 27.5 X 46.5 mm
Shaft Diameter : Ø 2.305 mm
Input Voltage : 36.0 V DC
No Load Speed : 11000 rpm
No Load Current : 0.10 A
Nominal Speed : 9700 rpm
Nominal Torque : 13.00 mNm
Nominal Current : 0.50 A
Stall Torque : 90.00 mNm
Stall Current : 3.00 A
Maximum Output Power : 25.00 W
Maximum Efficiency : 70 %
Torque at Maximum Efficiency : 12.00 mNm
Speed at Maximum Efficiency : 9500 rpm
Life (typical) : 150 hr
Weight : 90 g
Operation Temperature :-10 to 55°C
Storage Temperature :-20 to 80°C
Electrical Connection : terminals

• Reference : UAG10N02REX
• Dimensions (mm) : Diam. 20 x 17.2
• Step angle : 18
• Holding torque (cNm) : 0.7
• Detent torque (cNm) : 0.14
• Winding : bipolar
• Rotor shaft mounting : Centring 8 mm / mouting plate with screw M2
• Voltage (V) : 12

• Reference : UGM10CNN
• Dimensions (mm) : 51 x 62.5
• Height (mm) : 15
• Max. Torque (cNm) : 100
• Weight (g) : 45
• Ratio : 100